无人机大气环境应急监测系统设计探讨

环境应急监测是有效预防与应对突发性环境污染事故的重要基础。基于无人机平台的大气环境应急监测系统,作业效率高,机动灵活,使用方便、监测范围广,为突发性大气污染事件的应急监测提供了一种新的技术平台与工具选择,也为无人机的应用开辟了一个全新的领域。文章提出了基于无人机平台的大气环境应急监测系统的设计框架,分析了系统组成,并对系统功能和操作规程进行了初步设计,对于设计中存在的一些问题进行了探讨,并从技术发展角度,提出了未来该领域有待持续深入研究的主要方向:(1)机载大气环境监测仪器设备研制;(2)基于无人机平台的环境应急监测系统与环境应急指挥平台的一体化集成研究;(3)持续推动监测数据分析处理软件系统的研究。     

蚯蚓生物标志物在土壤重金属污染评价中的应用

随着土壤重金属污染的加剧,单纯的化学分析方法已不能真实地判别出重金属是否会对环境产生不利影响,因此需要建立有效的生物评价体系来辅助评价.蚯蚓广泛分布于土壤中并处于食物链的底部,其生化指标的变化对重金属污染起到早期预警作用,已被广泛应用到土壤重金属污染评价中.本文简要概述了蚯蚓生物标志物的发展,着重阐述了几种重要的生物标志物(抗氧化酶系统、金属硫蛋白、基因表达),来评价土壤重金属污染水平及作用机理,并对未来的蚯蚓生物标志研究和发展进行展望.     

餐饮废弃物的危害及环境管理对策

介绍了餐饮废弃物的特点,处理不当污染环境,探讨餐饮废弃物无害化处理方式,并提出了针对餐饮业废弃物的环境管理对策。     

舟山典型海区浮游植物的动态变化

2009年8月～2011年5月对舟山典型海区的浮游植物群落进行调查和分析,结果表明:在该海域共鉴定到浮游植物4门45属102种。其中蓝藻门2属4种,占3.92%;绿藻门1属2种,占1.96%;硅藻门38属89种,占87.26%;甲藻门4属7种,占6.86%。浮游植物细胞丰度的年波动在2.65×104/L～3.73×104/L之间,平均值为3.04×104/L,并且在春季(5月)最高,夏季(8月)次之。主要优势种有星脐圆筛藻(Coscinodiscus asteromphalus)、中华盒形藻(Biddulphia sinensis)、夜光藻(Noctiluca scintillans)、并基角毛藻(Chaetoceros decipiens)和佛氏海线藻(Thalassionema frauenfeldii)。其中夜光藻的丰度达4.9×103/L,佛氏海线藻达2.7×103/L。在整个调查过程中硅藻一直占据优势,朱家尖、桃花岛、东极和嵊泗的硅藻种类分别占95.2%,82.1%,81.3%和86.9%。通过对浮游植物群落的多样性指数分析,可认为该调查海区浮游植物种类组成和季节变化明显,群落结构稳定。研究还表明,水质优良程度为嵊泗>东极>朱家尖>桃花岛。     

Warm forming die design,part I: Experimental validation of a novel thermal finite element modeling code

Finite element analysis (FEA) has become an invaluable tool in the design of sheet metal stamping dies and processes. FEA has gained widespread acceptance as the best method of optimizing dies for conventional stamping processes. More recently, FEA has been shown to be an effective method of designing tooling for sheet forming processes. In this work, an FEA based approach is applied to the warm stamping (warm forming) process. This work introduces a new thermal finite element analysis software called PASSAGE®/Forming (PASSAGE) that enables the up-front design of the thermal management of warm forming dies. This thermal finite element analysis software is designed to specifically handle the forming and optimization scenarios related to the heating of a stamping die while minimizing user interface time. In this work, PASSAGE has been applied to a simple block of steel embedded with cartridge heaters to validate the prediction capability of this software under two different heating conditions. The results show that PASSAGE is capable of predicting the actual steady-state temperature distribution within the block with an acceptable level of accuracy while yielding notable information to the user with respect to specifying power requirements. A finite element software package like PASSAGE is a valuable tool that will aid greatly in the implementation of warm forming as a manufacturing process beyond the scope of the laboratory and into production.     

Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.     

流化床污泥干燥器床料的颗粒度对流化情况的影响

以上海白龙港污水处理厂流化床污泥干燥系统为研究对象,针对流化床污泥干燥器流化情况的好坏分析,在确定其它变量（流化风量、给料分配器转速、料层压差、运行负荷等）不变的情况下,对床料颗粒度的工艺参数进行研究实验,总结颗粒度的工艺参数对流化情况的运行变化规律,从而提高了流化床污泥干燥系统的稳定性、连续性和高效性。     

GB/T28001-2011 4.3.1要素关键点分析

从危险源辨识和风险评价程序、方法和控制措施的确定几个方面,对GB/T28001-2011《职业健康安全管理体系要求》的4.3.1要素进行了关键点分析.     

人工湿地堵塞机理及防堵措施浅析及研究

人工湿地作为一种高效率、低投资、低运行费用、低能耗的污水处理技术,越来越受到世界各国的关注。随着人工湿地的不断推广与应用,堵塞是影响其应用和推广的主要因素之一。湿地发生堵塞后,基质的渗透系数会急剧下降,过水能力也随之降低,大量引入湿地系统的污水直接雍积在湿地表面,长期积水引发恶臭、导致蚊蝇滋生,恶化运行环境。本文通过对人工湿地运行过程中出现的填料堵塞机理与特点进行分析,归纳和总结了人工湿地堵塞的影响因素,提出了人工湿地堵塞相应的解决措施,提高人工湿地对污水的处理效果,以期能够为人工湿地的应用及推广提供参考。     

论排污权交易与清洁生产的关系

为解决在排污权交易的前提下,企业如何积极主动地实施清洁生产,处理好排污权交易与清洁生产的关系。在排污权交易对清洁生产激励效果分析的基础上,运用数据对比和类比的方法,论证出排污权交易对清洁生产实施提供了经济支持,清洁生产对排污权交易的实施提供了技术上的保证。这种互为动力、支撑的关系,构成一种良性循环模式,为企业正确处理经济发展和环境保护之间的关系,达到经济效益和环境效益的双赢提供了依据。